In this section, is where you will need to set up your SIP Account Service information, in this case, we will be using our ONSIP Service. Once you are on the main menu, click on the VoIP Tab and click on the Basic Tab.
Once obtained the new IP address, we can log in and continue with our setup. With this step, you will be able to log in to your EnGenius DuraFon SIP base through DHCP.įor demonstration purposes, we have used an example of an EnGenius Router, where it showed us the DHCP Client list and our new DHCP IP address to access the Durafon SIP base unit. – Obtain DNS server address automatically Go back to the TCP/IP properties tab and select You will need to revise your new IP Address from the DHCP Clients on your network. Note: When you change the LAN IP to DHCP, once you click Apply, the change will take effect. Once you click apply, it will reboot the device for 39 seconds It is recommended to set the LAN in DHCP mode Once you have entered the correct username and password, click the Login button to open the web-based configuration page.Īs shown, its default setting is on the Static IP address. Once prompted to the EnGenius DuraFon SIP Log in page type: Once you have successfully registered your handsets to the base unit, you can now go ahead and log in to the SIP Base Unit Go to any of your preferred Internet Browser (Internet Explorer/Firefox/Safari/Chrome) and enter the IP Address: 192.168.1.156
#ONSIP PHONE SYSTEM REGISTRATION#
The base can perform the handset registration while the LED is flashing. Press and hold the register key on the base until the “INTERCOM” LED changes to a flashing status.
0 kommentar(er)
